Call Us Today! +86 15072262417|

Yearly Archives: 2021


Sea Island Yarn for Suede Fabric

Sea island yarn for suede fabric is not a single butterfly yarn. It is actually a composite ultra-fine mixed yarn that is processed by interlacing process after the combination of ordinary sea-island yarn and high-shrinkage yarn. Our company supplies the polymer (alkali-soluble PET chip and high shrinkage PET chip) for these two kinds of yarn

By |2021-12-30T09:16:33+00:00December 30th, 2021|Blog|0 Comments

Melt Spinning in Textile

Definition: Melt Spinning in textile is a process of manufacturing synthetic fibers. The high-molecular polymer is heated and melted into a spinning melt with a certain viscosity. Then the melt is continuously and uniformly squeezed to the spinneret by a spinning pump. The fiber stream is discharged through the pores of the spinneret. After being

By |2022-02-09T15:22:39+00:00December 22nd, 2021|Blog|0 Comments

Film-grade PET Chip

Low-End Carboxyl Film-grade PET Chip for PV Backsheet And Antiblock Agent Stable Thermal Film Grade PET Polymer for Photovoltaic Panels BOPET Description Film-grade PET Chip enjoys the characteristics of good thermal stability, high cleanliness, and excellent film-forming properties. It is mainly used to produce PET backsheet in PV or solar modules, BOPET, packaging film, printing

By |2022-03-25T04:49:19+00:00December 16th, 2021|Film-grade PET Chip|0 Comments

Spun and Blended Yarn Sizing Agent

Introduction of Spun and Blended Yarn Sizing Agent In this article, spun and blended yarn sizing agent refers to Sulphonated and Anionic Water-soluble Polyester Resin. It is in a low viscosity aqueous dispersion and can be 100% dissolved in hot water without alcohol or other solvents. It is a thermoplastic polymeric material made from the

By |2021-12-10T09:10:58+00:00December 10th, 2021|Blog|0 Comments

Top 10 Polyester Manufacturers in China

The top 10 Polyester Manufacturers in China mainly lie in Jiangsu and Zhejiang provinces. The polyester production capacity of these two provinces accounts for about 77% of the total national capacity. Zhejiang area is the largest production and marketing province, in which Huzhou, Xiaoshao, and Ningbo areas are the relatively concentrated industry layout. The top

By |2021-12-07T08:30:02+00:00December 7th, 2021|Blog|0 Comments

Easy Disperse Dyeable Polyester Chip

Easy Disperse Dyeable Polyester Chip for Disperse Dyed Fiber Spinning New Easy Disperse Dyed PET Chip for Yarn Production Description Easy Disperse Dyeable Polyester Chip (EDDP) is one modified polymer, which can be dyed by dispersing dye under atmospheric pressure. It is made from terephthalic acid (PTA), ethylene glycol (EG), isophthalic acid (IPA), and polyethylene glycol (PEG).

By |2021-11-30T07:31:13+00:00November 30th, 2021|Easy Disperse Dyeable Polyester Chip|0 Comments

Fabric Finishing Process

The fabric finishing process refers to the treatment to improve the appearance and feel, enhance the performance or give special function. To be more specific, it is a technical treatment method that gives fabrics color effects, morphological effects (bright and clean, suede, crisp, etc.), and actual effects (impermeable, non-felting, non-ironing, non-moth, flame resistance, etc.). Finishing

By |2021-11-28T09:49:36+00:00November 24th, 2021|Blog|0 Comments

Compound Sizing Chemical

Compound Sizing Chemical for Spun and Blends Yarn in Textile Preparation One-Shot Sizing Chemical / Single Shot Sizing Agent for Weaving Preparatory Description Compound Sizing Chemical is also called one or single-shot sizing agent. It is used for spun yarn or blended yarn sizing during textile preparation. Compound sizing chemical is a mixture of Polyvinyl

By |2021-11-22T07:39:28+00:00November 22nd, 2021|Blog|0 Comments

High Shrinkage Polyester Chip

Semi-dull Bright High Shrinkage Polyester Chip HSPET for High Shrink Fiber Precrystallized High Contraction Polyester Granular for Filament Yarn Spinning Description: High Shrinkage Polyester Chip (HSPET) is one modified or specialty polymer with a high shrinkage rate. It is obtained by adding a third or fourth monomer during the polymerization process. And we can provide

By |2021-11-13T16:30:28+00:00November 13th, 2021|High Shrinkage Polyester Chip|0 Comments
Go to Top