Call Us Today! +86 15072262417|info@polyestermfg.com

Monthly Archives: October 2026

Home|2026|October

PET vs PETG: Key Differences and Applications

If you work in packaging, plastics, or 3D printing, you have likely encountered both PET and PETG. Their names differ by just one letter, yet their prices, processing characteristics, and applications can vary widely. Some people assume that PETG is simply a premium version of PET and can replace it in almost any application. Others

By |2026-10-29T11:24:42+00:00October 29th, 2026|Blog|0 Comments

Why Is PET Used in Solar Backsheets?

Photovoltaic (PV) modules typically come with a 25-year warranty. Their backsheets must withstand ultraviolet radiation, resist heat and humidity, and maintain their performance for decades. Which plastic can handle all of that? Among familiar polymer materials, PEN offers excellent performance but costs three times as much. PI has outstanding heat resistance but is dark in

By |2026-10-22T05:32:58+00:00October 22nd, 2026|Blog|0 Comments

How Does BOPP Achieve a Fivefold Increase in Tensile Strength?

Biaxially Oriented Polypropylene (BOPP) film is much stronger than ordinary PP film. Before stretching, its tensile strength is around 30 MPa. After stretching, it can exceed 130 MPa, representing nearly a fivefold increase in strength. What exactly does biaxial stretching do to polyolefins? This article covers the following topics: the principles of biaxial stretching, the

By |2026-10-15T05:31:25+00:00October 15th, 2026|Blog|0 Comments

Polyester Filament Yarn Evenness: Key Factors & PET Chip Quality

People working in the polyester filament industry have probably heard the saying: “Poor evenness causes problems throughout downstream processing.” Although this statement may sound absolute, it reflects how important yarn evenness is to the quality control system for polyester filament yarns. For polyester filament producers, spinning conditions alone do not determine yarn unevenness. Raw-material consistency—including

By |2026-10-14T04:14:43+00:00October 10th, 2026|Blog|0 Comments
Go to Top