The methods for producing ultrafine fibers include direct spinning, composite spinning, and blend spinning. Among them, the focus of research and development is the method of using COPET to produce ultrafine fibers by alkali dissolution and stripping. Alkali-soluble polyester (COPET) is commonly used as the sea component, and regular PET is used as the island
Textile Stiffening Agent
Hubei Decon2022-08-10T10:19:55+00:00Water Soluble Polyester Resin for Textile Stiffening Agent Stiffener Polymer for Fabric Finishing Process Replacing Acrylic Emulsion DESCRIPTION Textile Stiffening Agent is one specialty high-molecular polymer. It is characterized by easy solubility, low viscosity, and good biodegradation. It can be used in the finishing process of fibers (like cotton, polyester, spandex, nylon), and various fabrics.
Water Soluble Polyester Resin
Hubei Decon2022-07-07T09:44:05+00:00Water Soluble Unsaturated Polyester Resin for Filament, Spun/Staple Yarn, Cotton Yarn, and Blend Yarn Sizing Polyester Resin for Fabric Stiffening Waterproof Coating and Digital Printing Paper Description: Water-soluble polyester resin is a water-based sulfonated and unsaturated polymer. And it is anionic. The main raw material is PTA and MEG. After the esterification and polymerization process,
Low Melting Point Polymer
Hubei Decon2023-04-19T08:03:46+00:00Low melting point polymer refers to low melt polyester chip here. The below questions help you to know more about low melting point polymers. Q1: Can you please give your manufacturing capacity? - Our production capacity is 200MT/Month for LM PET polymer. Q2: Can you provide us with a brief outline of the manufacturing process of LM pet polymers? -

Cationic Dyed Polyethylene Terephthalate
Hubei Decon2023-09-11T08:59:25+00:00Recently, we get an inquiry about Cationic Dyed Polyethylene Terephthalate (CD PET). Their technical requirements are as below. 1. Active material content to be higher than 1.9% in mole ratio or more than 3.5% in a weight ratio 2. IV (intrinsic viscosity) to be min. 0.60-0.65 dl/g 3. Both semi-dull and bright options are needed